1. Standard external gutter
2. Eaves and purlins
3. Roof panels
4. Wall panels
5. gutter tie
6. Roof panel bracket
Emphasizing the scientificity, standardization, and uniformity of nodes from the construction section, the eaves nodes are fixed ends
Learn More
Node - parapet wall and inner gutter
The thickness of the WH-50 standard gutter is 1.0mm, and stainless steel is used as the raw material;
The overlap of the inner gutter is welded using argon arc welding;
The roof panels and eaves purlins are connected using stainless steel screws;
Set up a rainwater overflow outlet every 30 meters to prevent excessive rainwater flow from overflowing the gutter and causing roof seepage;
The roof panel is equipped with rubber sealing plugs and sealant at the inner gutter to prevent rainwater from seeping in.
1. Cover plate at the top of the eaves
2. Top channel steel
3. Backboard of parapet wall
4. Outer gutter
5. Outer gutter overflow
6. Roof panels
7. Roof insulation cotton
8. Roof purlins
9. Main structure of eaves
10. Channel steel at the bottom of the eaves
11. Channel steel at the bottom of the eaves
Learn More
The unique square tube design is made of colored steel plates as raw materials, with a rugged appearance that blends seamlessly with the gutter, creating a better architectural effect;
The unique water collection box design of WH-50 adopts an hourglass shape based on fluid mechanics principles to avoid the formation of eddies and accelerate the discharge of rainwater.
Learn More
The design of the ridge node allows for the expansion and contraction of the ridge cover plate and roof panel together;
The connecting holes on the ridge cover plate are all oval holes, which avoid damage caused by thermal expansion and contraction, and facilitate accurate positioning during on-site installation;
The metal plug between the roof panel and the ridge cover can provide good sealing performance.
Learn More
The company has a high-level R&D and testing center, equipped with internationally excellent R&D and testing equipment, and has passed certifications such as ISO9001, ISO14001, ISO45001, etc. It has a high-level R&D team. We have built a complete production system including fully automatic spraying equipment, temperature control furnace, liquefied gas combustion system, CNC laser shearing machine, CNC bending machine, CNC cutting machine, CNC tower punching machine, CNC arc bending machine, imported automatic welding, etc. There are a total of 16 advanced production lines, and the annual production capacity of curtain wall aluminum veneer is over 2 million square meters
Learn More
The company has a high-level R&D and testing center, equipped with internationally excellent R&D and testing equipment, and has passed certifications such as ISO9001, ISO14001, ISO45001, etc. It has a high-level R&D team. We have built a complete production system including fully automatic spraying equipment, temperature control furnace, liquefied gas combustion system, CNC laser shearing machine, CNC bending machine, CNC cutting machine, CNC tower punching machine, CNC arc bending machine, imported automatic welding, etc. There are a total of 16 advanced production lines, and the annual production capacity of curtain wall aluminum veneer is over 2 million square meters
Learn More
The company has a high-level R&D and testing center, equipped with internationally excellent R&D and testing equipment, and has passed certifications such as ISO9001, ISO14001, ISO45001, etc. It has a high-level R&D team. We have built a complete production system including fully automatic spraying equipment, temperature control furnace, liquefied gas combustion system, CNC laser shearing machine, CNC bending machine, CNC cutting machine, CNC tower punching machine, CNC arc bending machine, imported automatic welding, etc. There are a total of 16 advanced production lines, and the annual production capacity of curtain wall aluminum veneer is over 2 million square meters
Learn More
All performance indicators of WH-50 roof system;
On the basis of the WH-50 roof system, an additional layer of hard insulation board lining has been added. The inner lining board not only protects the roof insulation material, but also makes the interior of the building beautiful and elegant. The combination of insulation board and lining board can save a lot of energy.
Learn More
Secondary structural components are used to support the roof and wall panels; Purlins are used for roof systems, while wall purlins are used for wall systems;
The WH-50 structural purlins connect the main structure with the roof and wall systems, and are an important component of the entire building system;
WH-50 structural purlins are pre punched in the factory to ensure correct and neat installation;
The WH-50 wall purlin is pre drilled in the factory according to the project, avoiding destructive operations such as on-site drilling or welding, extending its service life, and ensuring precise installation of the frame substructure
Accurate and shortened project duration;
There are two types of cross-sectional forms for substructures: Z-shaped and C-shaped. Z-shaped purlins are used for continuous structures, while C-shaped purlins are used for simply supported structures and open supports.
Learn More
The packaging and transportation of products play an important protective role. Careful packaging is an important guarantee for delivering products to the construction site in good condition and ensuring the normal performance of product design. WH-50's attention to product packaging details is also an example of the company's uniqueness.
Learn More
The material is colorless transparent unsaturated resin and glass fiber reinforced material, with a surface coated with DuPont film, which can prevent UV erosion, is not easy to change color and crack, and effectively maintains light transmittance;
Light transmittance of about 75% (single-layer) and 60% (double-layer);
The daylighting panel is equipped with steel rolled edges on both sides, so that its width and wave shape are completely consistent with the roof panel. The installation is completed with a 360 degree double lock rolled edge joint with adjacent steel plates to ensure waterproofing at the daylighting panel;
The daylighting panel and steel plate are pre riveted in the factory with rivets, and sealant is prefabricated at the overlap
Learn More
WH50 Roofing System - Longitudinal Splicing
The company has a high-level R&D and testing center, equipped with internationally excellent R&D and testing equipment, and has passed certifications such as ISO9001, ISO14001, ISO45001, etc. It has a high-level R&D team.
Learn More
Mobile Website
Business License
Dongyang Technology (Jiangxi) Co., Ltd.
Tel：4006529688
E-mail：383672041@qq.com
Address: Dongyang Technology (Jiangxi) Co., Ltd., Anyi County, Nanchang City, Jiangxi Province, China
©2025 Dongyang Technology (Jiangxi) Co., Ltd.