The outer gutter is made of the same material roll as the wall panel and suspended at the end of the roof panel;
The section of gutter shall be determined according to drainage calculation, and the performance of drainage channels under rainstorm shall be taken into consideration, which conforms to the water supply and drainage specifications;
Set up diagonal braces connected to the ribs to effectively fix the outer gutter;
The roof panels are connected to the eaves purlins using stainless steel screws;
There is a rubber sealing plug at the peak of the roof panel.
Learn More
WH50 Roofing System -360 Roll Edges
Before stitching: The factory has rolled 1800 and applied glue
Learn More
WH50 Roofing System - Floating Roofing
Galvanized aluminum magnesium roof panel sliding connector insulation cotton 12kg/m ³ high-strength galvanized purlin
Learn More
WH50 Roofing System - Longitudinal Splicing
Materials used: Lower pressure strip, sealing tape adhesive, pipe adhesive, upper pressure strip, nut
Learn More
WH-50 Roofing System - The Most Classic Vertical Seam Roofing System
The WH-50 roofing system is an upright seam roofing system, which is also widely used in the steel structure construction industry. The production line can automatically measure length, punch holes, cut and glue during the production process.
Learn More
WH-50 temperature adaptability
The WH-50 releases the deformation caused by thermal expansion and contraction through the free sliding of the roof panel. When designing the system, the roof panel is generally fixed at the eaves and can expand and contract freely at the ridge, so that this deformation does not affect the building function or damage the appearance of the building.
An important basis for the roof panel to slide freely according to temperature changes is that the roof clamp can be positioned on the same straight line; The pre punching technology of WH-50 ensures that a large number of roof clamps can be installed in the same straight line.
The triangular sliding rod on the WH-50 connector has been chrome plated, which increases the surface smoothness, wear resistance, and anti-corrosion performance of the sliding rod, making the roof clamp have good sliding ability; The initial position of the clamp hook on the sliding rod can be determined by two positioning pieces on the connecting piece, allowing the roof to obtain the same and sufficient sliding space in both directions along the sliding rod.
Learn More
Parallel transition and vertical transition
The company has a high-level R&D and testing center, equipped with internationally excellent R&D and testing equipment, and has passed certifications such as ISO9001, ISO14001, ISO45001, etc. It has a high-level R&D team. We have built a complete production system including fully automatic spraying equipment, temperature control furnace, liquefied gas combustion system, CNC laser shearing machine, CNC bending machine, CNC cutting machine, CNC tower punching machine, CNC arc bending machine, imported automatic welding, etc. There are a total of 16 advanced production lines, and the annual production capacity of curtain wall aluminum veneer is over 2 million square meters
Learn More
Prefabricated gable edging ensures accuracy during on-site installation, and the edging is more straight;
The internal support structure increases the strength of the decorative edge and makes it more aesthetically pleasing;
The transition decorative edge of the mountain wall and the on-site rolling edge of the roof panel ensure the integrity of the decorative edge and the roof panel, effectively preventing roof leakage;
Sliding node design allows the transition trim of the gable to move along with the roof panel;
The special design at the corner of the eaves of the gable makes the lines of the entire building's gable and gutter smoother and more beautiful.
Learn More
1. Roof panel
2. Roof insulation cotton
3. Roof purlins
4. Roof lining panel
5. Roof beams
6. Wall lining panel edging
7. Inner lining plate support angle steel
8. Wall lining panel
9. Transition edging of mountain walls
10. Gables edging
11. Wall panels
The transition decorative edge of the mountain wall slides together with the roof panel
Learn More
1. Standard external gutter
2. Eaves and purlins
3. Roof panels
4. Wall panels
5. gutter tie
6. Roof panel bracket
Emphasizing the scientificity, standardization, and uniformity of nodes from the construction section, the eaves nodes are fixed ends
Learn More
Node - parapet wall and inner gutter
The thickness of the WH-50 standard gutter is 1.0mm, and stainless steel is used as the raw material;
The overlap of the inner gutter is welded using argon arc welding;
The roof panels and eaves purlins are connected using stainless steel screws;
Set up a rainwater overflow outlet every 30 meters to prevent excessive rainwater flow from overflowing the gutter and causing roof seepage;
The roof panel is equipped with rubber sealing plugs and sealant at the inner gutter to prevent rainwater from seeping in.
1. Cover plate at the top of the eaves
2. Top channel steel
3. Backboard of parapet wall
4. Outer gutter
5. Outer gutter overflow
6. Roof panels
7. Roof insulation cotton
8. Roof purlins
9. Main structure of eaves
10. Channel steel at the bottom of the eaves
11. Channel steel at the bottom of the eaves
Learn More
Mobile Website
Business License
Dongyang Technology (Jiangxi) Co., Ltd.
Tel：4006529688
E-mail：383672041@qq.com
Address: Dongyang Technology (Jiangxi) Co., Ltd., Anyi County, Nanchang City, Jiangxi Province, China
©2025 Dongyang Technology (Jiangxi) Co., Ltd.