The outer gutter is made of the same material roll as the wall panel and suspended at the end of the roof panel;
The section of gutter shall be determined according to drainage calculation, and the performance of drainage channels under rainstorm shall be taken into consideration, which conforms to the water supply and drainage specifications;
Set up diagonal braces connected to the ribs to effectively fix the outer gutter;
The roof panels are connected to the eaves purlins using stainless steel screws;
There is a rubber sealing plug at the peak of the roof panel.
了解详情
The WH-50 roof opening support is made of aluminum alloy, with a hard insulation board attached inside. It is lightweight, high-strength, and not easy to rust. The opening support is integrated with the roof panel
Sliding effectively resists temperature deformation caused by thermal expansion and contraction;
The roof opening is precision cast once in the factory, perfectly matching the waveform of the WH-50 roof panel. The roof panel is designed with reserved openings, making on-site installation convenient and fast; At the same time, a rainwater diversion plate has been specially designed on the upstream surface to ensure smooth drainage;
The connecting bolts and sealant between the roof opening and the roof panel are set inside the roof opening to prevent rusting of the bolts and leakage at the opening connection;
Multiple sizes are available for selection, and the position can also be flexibly adjusted.
了解详情
Completion effect of roof ventilator
The company has a high-level R&D and testing center, equipped with internationally excellent R&D and testing equipment, and has passed certifications such as ISO9001, ISO14001, ISO45001, etc. It has a high-level R&D team. We have built a complete production system including fully automatic spraying equipment, temperature control furnace, liquefied gas combustion system, CNC laser shearing machine, CNC bending machine, CNC cutting machine, CNC tower punching machine, CNC arc bending machine, imported automatic welding, etc. There are a total of 16 advanced production lines, and the annual production capacity of curtain wall aluminum veneer is over 2 million square meters
了解详情
WH50 Roofing System -360 Roll Edges
Before stitching: The factory has rolled 1800 and applied glue
了解详情
WH50 Roofing System - Floating Roofing
Galvanized aluminum magnesium roof panel sliding connector insulation cotton 12kg/m ³ high-strength galvanized purlin
了解详情
WH50 Roofing System - Longitudinal Splicing
Materials used: Lower pressure strip, sealing tape adhesive, pipe adhesive, upper pressure strip, nut
了解详情
WH-50 Roofing System - The Most Classic Vertical Seam Roofing System
The WH-50 roofing system is an upright seam roofing system, which is also widely used in the steel structure construction industry. The production line can automatically measure length, punch holes, cut and glue during the production process.
了解详情
WH-50 temperature adaptability
The WH-50 releases the deformation caused by thermal expansion and contraction through the free sliding of the roof panel. When designing the system, the roof panel is generally fixed at the eaves and can expand and contract freely at the ridge, so that this deformation does not affect the building function or damage the appearance of the building.
An important basis for the roof panel to slide freely according to temperature changes is that the roof clamp can be positioned on the same straight line; The pre punching technology of WH-50 ensures that a large number of roof clamps can be installed in the same straight line.
The triangular sliding rod on the WH-50 connector has been chrome plated, which increases the surface smoothness, wear resistance, and anti-corrosion performance of the sliding rod, making the roof clamp have good sliding ability; The initial position of the clamp hook on the sliding rod can be determined by two positioning pieces on the connecting piece, allowing the roof to obtain the same and sufficient sliding space in both directions along the sliding rod.
了解详情